Follow us on Twitter!
Don't judge the unknown - Grindordie
Wednesday, April 23, 2014
HellBoundHackers Main:
HellBoundHackers Find:
HellBoundHackers Information:
HellBoundHackers Exploit:
HellBoundHackers Programming:
HellBoundHackers Think:
HellBoundHackers Track:
HellBoundHackers Patch:
HellBoundHackers Other:
HellBoundHackers Need Help?
Members Online
Total Online: 23
Guests Online: 20
Members Online: 3

Registered Members: 82885
Newest Member: ConiBE
Latest Articles

Supercharge a Dart gun

Arrow Image wanna anoy a co-worker or shoot your friend or just plain piss off your siblings well this article is for you

This is a simple way to annoy just about any one you want

-1 maverik dart gun
-2 a little phillip screwdriver
-3 needle nose plyers or muscle
-4 a soda

First off this is made for a gun called a Maverik it looks like this


1) First we must remove the screws from the thing that you pull back to cock it
*use your little screwdriver and clip the needle nose pliars on there for the first couple turnes to get it started do this for all the screws unless you are strong

2) now do what you did for the little cocking thingy for the rest of the gun

3) lay gun on LEFT side and remove the RIGHT side of the gun very gently


1) there should be a big spring just strech that puppy out but but BEFORE you take it out look at how the chamber touching the spring look at how it is positoned you must remeber that now you can strech out the spring dont make it too big other wise it will be too hard to put back on trust me I know from experiense


1) on the revolver there should be a little square on the back or at least I think its a square and ther should be this thing connected to the trigger when you pull the trigger it should turn well this has to be inline with the revolver the thing that holds the darts they MUST BE LOCKED TOGETHER other wise your gun will not work

2) Now we put the spring back and the chaber back make sure they are like how they were when you took the gun apart now screw everything back be caureful sometimes the spring pops out dont worry just keep trying and trying

3) now we put the cocker back on ther is a little metal pin that must go thorugh the little spring hole if it is no in there it will not fire to get this spring out take something skinny that will fit through there and pull the spring out carefully you DO NOT want to strech this spring out other wise you will have to hold the cocker thig all the way forward to fire now just connect and your all done

w00t you just hopefully succesfulley modded your first dart gun if your self a pat on the back

AHH SHIT IT DOESENT WORK is the pin on the cocker on the little spring

is the cocker spring streched out too much if so push and hold forward to fire

I hope this helped this article was made by me for the members of hbh it must not be put on any other site without me knowing



BluMooseon April 18 2006 - 16:38:03
Nice article, but what does this have to do with hacking or computers? Pfft
wolfmankurdon April 18 2006 - 17:01:17
you could 'spring' the steele
system_meltdownon April 18 2006 - 17:28:51
@BluMoose, it doesn't have to be, that's why it's in the "Other" section Pfft
BluMooseon April 18 2006 - 21:12:48
I knew that ^_^ Still dont understand why we have 'other articles' on a hacking site Frown
system_meltdownon April 19 2006 - 21:00:44
Because some people find other stuff than computers interesting too, not everyone's a complete computer addict
iamgodoffireon April 20 2006 - 14:49:39
also it might have to do with the hacking mindset. To explore and mod and look at things differntly. for instance this is about modding a dart gun. simple and easy to do but i doubt that 1 in a 1000 kids with this gun has done that before. You know what i mean? Pfft article rate 5/5
Post Comment


You must have completed the challenge Basic 1 and have 100 points or more, to be able to post.